Bike Rollers Tacx Neo 2T Smart Trainer
The Tacx Neo 2T Smart roller kit is an exceptional training tool for indoor cycling. With an improved design and revamped components, it offers new functions and pedalling analysis capabilities and further improvements that make it one of the quietest and most realistic training rollers. It has an improved design, incorporates refurbished components and offers an immersive experience, as well as increased support for pedaling analysis. Includes one month premium Tacx subscription.
New:
- Quieter
The newly developed magnetisms represent a significant improvement in the silent performance of the NEO 2T Smart. The noise generated by the movement of internal air is significantly reduced, as are vibrations transferred to the ground at low cadence. The result is a quieter intelligent training roller than ever
- Powerful climbs and sprints
The NEO 2T Smart features a new engine design that improves pedal feel when climbing or accelerating. The updated engine also offers more power, allowing higher levels of endurance during low speed sprints
- Improved pedaling analysis
The previous model NEO 2 Smart was equipped with a right and left capacitive sensing sensor that accurately measured the exact position of both legs, the NEO 2T Smart takes pedaling analysis to a higher level. With the addition of ANT+ connectivity and advanced cycling dynamics, you can now analyze pedaling through third-party software, including Edge software
- Design of the axle
The rear axle of the NEO 2T Smart has been redesigned to be compatible with more bicycles, without the need for adapters. Directly compatible with all bicycles, except 135x10 and 135x12, for which an additional adapter is required
Features:
- More realistic routes
The NEO 2T Smart is designed to simulate outdoor routes as realistically as possible. It reacts instantly to changes in speed or slope and allows for varying degrees of movement to the right and left during pedaling, following the natural movement of the body. It also incorporates a dynamic inertia function, which controls the inertia of the mass and compensates for the weight, speed and angle of inclination to make the paths as realistic as possible. Use the Tacx software or the Zwift app and enjoy the road feel feature. This function allows the roller to vibrate and simulate the feeling of riding the bicycle on different surfaces, such as cobblestone streets or gravel roads. Additionally, when connected to an external power supply, the descent simulation accurately simulates a descent path
- Powerful design
NEO 2T Smart allows intense training sessions. Its design integrates 32 neodymium magnets that offer high braking force and high power levels. In addition, it has a maximum sprint resistance of 2200 watts and can simulate climbs with slopes up to 25%. It also generates power from the pedaling, without the need for an external power supply or plug. This training roller is designed for endurance, regardless of the intensity of the session. The rear axle has also been redesigned, allowing this training roller to be compatible with multiple bikes without the need for adapters
- Precise and reliable operation
The NEO 2T Smart training roller is designed to provide reliable, accurate and consistent measurement of speed, cadence and power, so you can monitor your performance and progress. Also, it does not require calibration and allows you to measure data with a maximum variation of 1%
- Full connectivity
The training roller communicates via Bluetooth Smart technology and the ANT+ FE-C protocol, allowing compatibility with a wide range of popular training applications. Enjoy a famous cycling route with Tacx software, take on the virtual worlds of Zwift or use other platforms like TrainerRoad. The training roller can also be used in stand-alone mode. When not connected, it simulates a flat path; the faster you ride, the more resistance increases. Connect to multiple devices at once and take advantage of software features while monitoring performance with your Garmin bike computer
- Train in your own way
NEO 2T Smart uses the innovative Tacx software for indoor training. Enjoy your time in the saddle with a complete library of over 100 high quality videos, which will allow you to experience the feeling of climbing the steep hills of the Alps or cycling through the cobbled streets of Bologna. Take advantage of structured training plans, designed according to your fitness level, to help you achieve your goals. Compete against live opponents, upload GPS data and 3D maps, create your workouts based on settings such as slope, power, heart rate or functional threshold power (FTP) and share them on Strava.
Specifications:
- Electrical requirements: 110-240 volts
- Power indicator: multi-colored LED, on the base
- Connection indicators (ANT+/BLUETOOTH) 2 LED indicators
- Gear ratio: Crown configuration: up to 3 sprockets; sprocket teeth: adjustable between 22 and 53. Rear sprocket: up to 12 sprockets; sprocket teeth: adjustable between 11 and 40
- Factor: Q 147 mm
- Maximum power: 2200 watts
- Maximum inclination: 25 %
- Simulation of descent: Yes
- Maximum torque: 88 nm
- Maximum braking force: 260 N
- Virtual flywheel
- Massive inertia: Variable up to 125 kg
- Dimensions: 575 x 750 mm
- Height: 55 mm
- Weight: 21,5 kg
- Wireless communication ANT+ connectivity and Bluetooth wireless technology
- Control Smartphone, tablet, ANT+ enabled bicycle computer, in stand-alone mode or connected to a computer via ANT+ antenna
- Speed, cadence and power measurements
- Reading: Smartphone, tablet, cyclocomputer and computer with ANT+ antenna
- Accuracy error: <1 %
- Compatibility: Shimano/SRAM 9-11
- Includes: roller, heart rate monitor, heart rate monitor, heart rate monitor, water bottle, subscription
Contents of the package:
- NEO 2T Smart training roller
- Support for front wheel
- Quick release for road and mountain bikes (5 mm)
- Quick release for direct drive bikes with adapters (142 x 12 mm and 148 x 12 mm)
- One month of Tacx Premium Software